Dakota Digital Voltage/Current BIM Module

The BIM-05-1 allows the Dakota Digital VHX and VFD systems to display up to 2 additional Volt or 2 Current or a combination of 1 Volt and 1 Current readings. This module will read current with no sending unit required. If you want to read Amps, then a sending unit is needed for each Amp reading you desire (1 or 2).

Display Sender
Part #
Range Resolution Low
Warning
High
Warning
VOLT N/A 0- 50.0VDC 0.1 0- 31 10- 41
CURRENT SEN-20-3 0- 250A 1 N/A 5- 320

*The BIM-05-1 is designed to supply information to the VFD3 rev. G and VHX control box instrument systems only. Earlier control boxes (with an aluminum case) are not compatible with the BIM family of Expansion Modules.

Instruction Manual