Stainless Steel Hardline, 20 Ft. - 3/8" (-6 AN)

SOLD in 20Ft. Roll

These aircraft-quality, seamless, 304 stainless lines feature a 0.028 in. wall thickness and are double annealed for easier flaring and bending compared to other stainless steel lines. They're rated for a maximum of 6,000 psi and have been pressure tested and checked for safety. Order the tubing diameter needed for your applications.

NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines. Stainless steel can also be difficult to seal when replacing an existing brake or fuel line. The previously installed line can create a wear pattern on the flare seat which will not allow the new stainless steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheel cylinder, brake caliper, etc. It's possible that the existing component may need to be replaced for a proper seal.